Cyclone Plus is a boiler mounted magnetic cyclone filter that removes debris from the heating system, using both magnetic and centrifugal force, reducing the risk of damage to the boiler.
Condensate Pump
For low level boiler installations where the condensate needs to be pumped upwards or where drainage connection is difficult.
Features
- Compatible with combined condensate and PRV connection
Detailed Information
Required for low level boiler installations where the condensate needs to be pumped upwards for removal, or where drainage connection is difficult. Compatible with the combined condensate and PRV connection.
Products in this Range
Operates as a hot water priority valve, meaning if the heating is on and there is a hot water demand, the valve will divert the primary heat to the cylinder until the cylinder sensor is satisfied. Must be used if adding the weather compensation probe to a system boiler.
Fitting the ingenious PremierPack wall-mounting jig automatically provides the protection of our Cyclone Plus magnetic filter and increaes the standard boiler warranty. There are two versions available, each compatible with different boiler models.
The PremierPack Pro has been specifically designed to fit our E-Tec and Evoke boilers and adds an additional 2 years warranty, while the PremierPack Extra will fit with the E-Tec Plus and E-Tec S models, and will increase the boiler warranty by 3 years.
Alpha's high efficiency boilers have their own telescopic CD EasyFlue with both sections brilliant white and the flue terminal factory fitted.
The Alpha CD EasyFlue is for simple horizontal flues and is available in two lengths; 500mm and 1000mm. The telescopic inner and outer ducts slide together to make the correct length so there is no measuring, no cutting and no making good as two sealing collars are provided.
The telescopic CD EasyFlue can save up to an hour's installation time and gives a really stylish finish. Extension kits are available to allow a horizontal flue length of 12m and a vertical flue length of 15m.
Modifies the location of the gas inlet and the primary heating return.