Protect external condensate pipes against freezing with the Alpha E-Tec trace heating kit.
- Available in two lengths - 500mm and 1000mm
- Easy to install
- Neat and stylish finish
- Built-in plume management
- Extension kits available
- Reduces installation time by up to an hour
- Can divert plume at 45° angle from original terminal position
EasyFlue comes with a range of plume management options. The standard terminal can be adapted to divert plume at 45° upwards, to the left or right. For applications where there is a need to divert plume further away from the original terminal position, there is a full Plume Management Kit available.
Products in this Range
Fitting the ingenious PremierPack wall-mounting jig automatically provides the protection of our Cyclone Plus magnetic filter and increaes the standard boiler warranty. There are two versions available, each compatible with different boiler models.
The PremierPack Pro has been specifically designed to fit our E-Tec and Evoke boilers and adds an additional 2 years warranty, while the PremierPack Extra will fit with the E-Tec Plus and E-Tec S models, and will increase the boiler warranty by 3 years.
For low level boiler installations where the condensate needs to be pumped upwards or where drainage connection is difficult.
Operates as a hot water priority valve, meaning if the heating is on and there is a hot water demand, the valve will divert the primary heat to the cylinder until the cylinder sensor is satisfied. Must be used if adding the weather compensation probe to a system boiler.