Protect external condensate pipes against freezing with the Alpha E-Tec trace heating kit.
Pipe Crossover Kit
Modifies the location of the gas inlet and the primary heating return.
Features
- Speeds up installation of combination boiler swaps
Detailed Information
The Pipe Crossover Kit may help speed up installation of combi boiler swaps by allowing the easy repositioning of the gas inlet between the hot and cold water outlets, while the heating return is moved to the far left.
Please note: the Pipe Crossover Kit cannot be used in conjunction with the Cyclone Plus filter or PremierPack wall-mounting jigs.
Products in this Range
We offer a selection of controls that set your heating system to suit your lifestyle and desired comfort level.
Cyclone Plus is a boiler mounted magnetic cyclone filter that removes debris from the heating system, using both magnetic and centrifugal force, reducing the risk of damage to the boiler.
Operates as a hot water priority valve, meaning if the heating is on and there is a hot water demand, the valve will divert the primary heat to the cylinder until the cylinder sensor is satisfied. Must be used if adding the weather compensation probe to a system boiler.
Fitting the ingenious PremierPack wall-mounting jig automatically provides the protection of our Cyclone Plus magnetic filter and increaes the standard boiler warranty. There are two versions available, each compatible with different boiler models.
The PremierPack Pro has been specifically designed to fit our E-Tec and Evoke boilers and adds an additional 2 years warranty, while the PremierPack Extra will fit with the E-Tec Plus and E-Tec S models, and will increase the boiler warranty by 3 years.