close

ARES Tec

Product Information

High output modular condensing boiler range providing a flexible and efficient commercial heating solution.

Downloads

We are on BIM Store

CAD Drawings

BIM Files

Product Video

Detailed Information

The Modular Approach

Each heat generating module within our ARES Tec boilers is self-contained, with its own down-firing pre-mix gas burner, fan, ignition and safety controls.
As system load decreases, a built-in Boiler Cascade Manager modulates the boiler down to the combined minimum. As loads continue to reduce, individual modules are switched off as necessary down to a minimum output of a single module – 12 kW for 200- 350 kW models and 22kW for 440-900 kW models.
This ensures optimum load matching and minimises wasteful boiler cycling, maximising energy efficiency in the process.
The combination of a high modulation ratio up to 1:40 and a high output plus very low water content ensures rapid warm-up and turn-down times for ARES Tec boilers. They are subsequently also able to respond quickly to changing demands throughout the day.
Thanks to their modular design, ARES Tec boilers will continue to operate even in the unlikely event that a single module malfunctions.
 
Benefits:
  • Optimum load matching
  • Minimal boiler cycling
  • Rapid warm-up time
  • Quick response to changing demands
  • Boiler is able to operate even if one module fails
Controls
All electrical functions on ARES Tec boilers are operated by a single integrated set of advanced microprocessor-based controls – a Boiler Cascade Manager and E8 Thermo-controller.
Housed in a pneumatically operated lift-up panel that can be closed to obscure them from view and prevent them from being tampered with, these provide full commissioning and fault diagnostic displays for individual modules.
 
Accessory Kits

There is a selection of complementary accessories to choose from, making ARES Tec the ultimate one-stop flexible heating solution for commercial buildings. 

ARES Tec is a new range of floor standing condensing boilers that provide an infinitely flexible solution for buildings requiring a high output heating system.

Features

  • Nine models with outputs ranging from 200-900kW
  • Can be cascaded for higher output requirements
  • Available for NG or LPG
  • Exceptional energy efficiency
  • High modulation range up to 1:40
  • Low emissions (<31 ppm low NOx)
  • Compact dimensions
  • Ultra-low operating noise levels (<49 dBA)
  • IPX5D rated

There are nine floor-standing boilers to choose from, with outputs ranging from 200kW to 900kW. Each one is made up of a number of self-contained heat generating modules forming what is, in essence, a series of boilers linked together within a single casing. This modular design enables ARES Tec boilers to optimise energy efficiency and comfort levels for building occupiers like no other boilers available today.

Each linked module shares a single set of ancillary components including flow and return pipes, electronic controls and flue. This greatly eases the installation process and, along with the internal easy access layout of each boiler, simplifies ongoing maintenance.

Compact overall dimensions and ultra-low operating noise levels gives the system designer greater flexibility when it comes to positioning the boiler within the building.

With a host of benefits for the consultant, contractor, client and building occupier, ARES Tec boilers provide the perfect heating solution for a wide range of projects from hotels to office buildings, schools to sports centres.

Simple CAD Drawings

To download any of the Simple CAD files below, please select the ones you require and click "Download"...

Complete CAD Drawings

To download any of the CAD files below, please select the ones you require and click "Download"...

BIM Files

To download any of the BIM files below, please select the ones you require and click "Download"...

Product Specification

ARES Tec boilers have been built to the highest possible standards using only the very best components available. Designed with meticulous attention to detail, they are some of the most technologically advanced and innovative boilers of their type.

Each heating module features:

  • A PCB to manage the boiler
  • Automatic and pre-programmed electronic management and thermal regulation
  • Individually controlled premix modulating burner
  • Electronic ignition with flame ionisation
  • Modulating gas valve
  • Integrated fan inlet non-return valve
  • Temperature and safety sensors

For maximum heat transfer, each heating module is a counter-flow heat exchanger featuring:

  • Cast aluminium alloy with silicon and magnesium to make it light, strong and corrosion resistant
  • Serpentine water ways to optimise heat transfer
  • Cast pin design to increase surface area and boiler efficiency

To simplify siting and installation, ARES Tec boilers benefit from the following:

  • One-piece interconnecting flow and return manifolds
  • Three flue position options (rear or either side)
  • Reversible left/right handed water and gas connections (200-350 kW models)
  • A range of complementary accessory kits

Products in this range

ProTec Plus system boilers

ProTec Plus system boilers

Designed for larger output requirements to provide heating only for sealed central heating and open systems.

View Product
Like us on Facebook Follow us on Twitter
close

Your Details

Please provide your details below and we will email you links to the requested files.

If you would like more advice, please enter your contact number below and a member of our team will call you.

×

We use cookies to improve your experience, including to personalise content, to provide useful features, and to analyse our traffic and measure performance. By using this site, you agree to our use of cookies.

×
Cookie Preferences
Intro
Essential Cookies
Non-Essential Cookies

About Cookies and your Privacy

When you visit any web site, it may safely store or retrieve information in cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalised and consistent web experience.

We respect your right to privacy, so you can choose not to allow some types of cookies. Click on the different category headings to find out more and change our default settings. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer. Some cookies are essential and the website would not function without them.

Always Active

Essential Cookies

These cookies are essential for the website to function and cannot be switched off in our systems.

These are usually to do with keeping track of information between page views like your privacy preferences or that you have logging in.

You can set your browser to block or alert you about these cookies, but some parts of the site will not then work. 

The essential cookies we set are:

  • PHPSESSID - A unique reference to your browser session on our website. This allows us to keep track of things like your basket and whether you are logged in. This cookie will expire after the browser is closed
  • plii - This cookie ensures you are kept logged in to the website during your session.
  • nfPP-* - These cookies store your preferences regarding cookie preferences, like if you have accepted the notice and if you have optionally disabled non essential cookies. These persist between browser sessions

Non-Essential Cookies

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. Some information these cookies collect is aggregated and therefore anonymous. If you do not allow these cookies we will not know when you have visited our site, and will not be able to monitor its performance and make improvements.

  • Facebook: We use conversion tracking from Facebook to help us understand how effective campaigns are from Facebook.
  • Google AdWords Conversion: We use conversion tracking to help us understand how effective our digital campaigns are.
  • Google Analytics: We use Google Analytics to collect information about how visitors use our website. For example, we collect details of the site where the visitor has come from and the total number of times a visitor has been to our website.
  • Google Tag Manager: We use Google Tag Manager to track user behaviour, traffic analysis and marketing optimisation.
  • LinkedIn: We use conversion tracking from LinkedIn to help us understand how effective campaigns are from LinkedIn.